Marnie, speak! Good girl.

I've been doing my crafty thing as well. Here is some left over wool/soy silk roving I've had a little sample of. Since there was such a small amount, I spun it as finely as possible. I used my 0.6 oz Golding spindle which helped me achieve a true lace weight yarn. I knit a little swatch of it last night and got 9 stitches to the inch on a US #1 needle and I certainly could have gone down a needle size without a problem. This stuff spun beautifully. I assume it's the soy that gives it its smooth drafting ability since I still find myself struggling a bit with pure wool.

It's taken me a little while to adapt to my 0.6 oz spindle. I learned on a 1.3 oz, have been using my 0.9 oz for almost everything but I'm now really starting to appreciate this lighter one. I know there are people who can spin spider web thin yarn on a 3 oz spindle and I tip my hat to those folks. I just can't get enough spin into the fiber soon enough to ever be successful. My spindle will have proven its dropping ability long before I get a yard spun. But a light spindle holds its own challenges. I realize it's all simple physics, but it's hard to know exactly how it will feel if you aren't well versed on those sorts of sciences. In my case, I face two big hurdles with a lighter spindle.

1. I have to spin the spindle harder to get a long enough spin to be productive. Or, I have to spin the spindle more than once to spin the same length of yarn.


2. The spindle tends to be less stable in its spin. I suspect this is partially technique on my part, but, while drafting, I sometimes maneuver in such a way as to send my spindle into a planetary like rotation, where the poles no longer sit at a true north/south*. While this works splendidly for our fine earth, it's less effective for a spinner.
   

* Ok, ok, I know that North and South are relative to our own planet and not the least bit relevant once you step off the planet or out of our solar system. Let's think "grade school diorama," for this analogy, ok?

More spindly fun, after the bump.

Not very long ago, Wendy spun up the most beautiful orange roving. You can see it in all its splendor here.

If you swing by my blog, with any regularity, you know that I'm not terribly drawn to warm colors, as a general rule. Blues, greens, and purples dominate over all other colors. It's not that I don't love a wide variety of colors, its just that, given a choice, I stay in my color comfort zone and stick to shades I know look good on me and that I love looking at. But this orange had me smitten. So I headed on over to Nistock Farms, where Wendy had gotten her roving, and I got myself 8 delicious ounces of Autumn Spice.

It arrived last night and I didn't even shed my heels and suit before I was spinning away. We reached the front door at 6pm, by 7:30, I had spun, plied, washed and set to dry 26 yards of handspun.

Since these pictures were taken around 3:30 AM (I'm having me a little bout of insomnia, thanks for asking) there is no proper lighting. I think, all things considered, the pictures are fairly representative of the color overall, but they don't really capture some of the beautiful subtleties of the shade. It's mostly a lovely pumpkin color, with shades of a soft pink, some grey and yellow. The overall effect is amazing.

The wool is definitely not as soft as, say, a merino or alpaca, but I love it and it spins surprisingly easily on my little 0.9 oz spindle.

In addition to the 8ozs of Autumn Spice, I also got myself 4oz of the Fudge Brownie shade you'll find on the same page. I haven't even begun to spin that.

To all of you spinners out there, I'm starting to find myself overflowing with roving. I have absolutely no issues with this. I am wondering, though, what is the best way to store the stuff to avoid any problems with it as it waits for my little spindles to spin it up? It's relatively warm and dry here in LA, though I live within a very short distance of the ocean.

I just love my Autumn Spice Cotswold. I think about spinning it when I'm at work and it's become increasingly hard not to burn dinner while I try to work spinning into my nightly routine.

Here's a bit more of it spun up and plied. Why do I love this yarn so? I don't know. It's not the softest yarn I have, but it's certainly soft enough to be knit into a nice wrap or a cardigan. The little halo of fuzziness delights me. At first I was thrown by it, but now I love it more and more. I pre draft the roving and the yarn just seems to spin itself. It's nearly effortless.

But I also got myself some of the Fudge Brownie roving. This stuff is gorgeous. The color is dark chocolate and the feel is silky, dense and smooth. Fudge Brownie is the perfect name for it. I find it harder to spin though. Instead of long snakes of roving that I can predraft, this tends to want to fall into clumps. It's smooth but the fibers like to grab ahold of each other in unexpected ways so I end up with more thick and thin areas than I'm used to. I tried my 0.9oz and then my 1.3oz spindle. The extra weight seemed to help. I decided to try spinning it a bit thicker than normal, and this is the result.

On top is both of my skeins of Autumn Spice held together in a single skein. You can see that the brown top is much thicker. Spinning thicker yarn is turning out to be challenging for me. I did notice, in the process, that I like the way the yarn looks when it is really tightly spun. It loses some of it's softness but it picks up a sheen that's decadent. I think my next skein will err on the side of overspun, to see what happens.

Here's a close-up of the two yarns. You can see that my brown yarn is not very even.

MJ has been trying to spin more thickly too. A lot of people feel that spinning fine weight yarn is harder than thicker yarn. But I think most people acclimate to spinning a certain weight of yarn and need time to learn to control other weights. It's not a matter of "this weight is good" and "this weight is bad." I'll consider myself a good spinner when I can spin many weights well. For now, I proudly wear my "novice" crown, with my head held high. No shame in it.

There's just one thing that bothers me. Do you hear it? I know I do. I hear the sweet song of the wheel calling me. I'm trying to be strong and, luckily, I do not think I could reasonably justify the cost right now. But that doesn't mean I'm not haunted by the thought of spinning all my gorgeous roving in a couple days instead of needing months to do it. I can't deny that seeing huge skeins of continuous roving, wound off a bobbin, doesn't make me drool a little. I'm counting on a certain friend of mine, to keep me sane. And if I happen to visit this site several times a day, it's only for research purposes.

I'm back to trying to design a shawl with my handspun, and once again, I'm starting from scratch with a new design and new yarn.

For those of you who visit regularly, you are probably well aware of my current fascination with my Autumn Spice Cotswold from Nistock Farms. It will then come as no surprise that I want to actually knit what I've spun.

This is what I have so far.

I like it. So why am I reluctant to post this? Because I'm a bit worried it will go awry, as my previous attempts at a shawl have. I'm not terribly fond of repetitive knitting. I'd much rather work something with an intricate stitch pattern or lots of shaping, than something that's very repetitive. I can manage a scarf or sock, here and there, but it's hard for me to keep my interest. So will this piece ever be anything more than a glimmer in my eye? Time will tell.

Even more questionable, though, is whether or not I'll ever spin enough of the roving with my spindle to have a shawl large enough cover my shoulders. I suspect I’ll need quite a bit once my rows get a bit longer.

More spicy goodness, after the bump

Wednesday was a long day. It wasn't a bad day, but it was long. Leo and I left the house at 5:15 AM, so we could make some early morning work obligations, and we didn't get home till almost 9 PM, because I had a beginner knitting class to teach that evening. That's a long day. But, awaiting me, when I returned home, was a big package with a little surprise inside.

It's a belated birthday present from my step father, a brand new spindle from Golding.

I now have four wonderful spindles in my collection.

From left to right, their weights are:
1.9 ozs, 1.3 ozs, 0.9 ozs, 0.6 ozs

I've been spinning some merino and I think I'm getting a feel for the heavier weight. It's been a nice match and a good chance to practice spinning some thicker gauge yarn, though I have to admit that my left arm gets tired more quickly. I can see myself using this spindle a lot. The larger whorl means I can use it to ply my finer yarns and the weight is a nice match for roving that tends to be grippier (technical term).

While at Stitches, I got myself some lovely light sage green merino/silk blend roving. I bought it from the Angora Cottage booth. The first day, they had a sale and I got this roving for a great price.

I've been spinning it up on my 0.9 oz spindle, working the singles into about a fingering/DK weight with hopes of having a light worsted when I'm done.

I am finally feeling comfortable spinning slightly thicker weight yarns. I'm not sure I could do a big chunky yarn yet, but it's getting better each time I try.

Let me tell you, though, I've been acquiring roving at a pace I can't imagine ever catching up to with my lovely little hand spindles. Janel of both Spindilicity and Cameleon Colorworks fame, sent me 3 gorgeous servings of her hand dyed roving.

I got two of the Merino/Silk dyed in colorway "Catalina".

This was the same colorway I used for this pattern.

And then there's this:

The colorway is Indian Wedding and the fiber is Merino/Tencel. I'm not sure why I've been so drawn to warm tones lately, but this color is decadent. I've never spun a Tencel blend before, so we'll have to see how that goes, but if it's anything like spinning a silk blend, I think I'll like it.

And if that's not enough roving to add to the bunch, I'm awaiting an order I just placed with Amy for some of her Almost Solid Series roving.

All the notes after the bump

I can't quite decide what my the PPO portion of my medical insurance is referring to. I thought it was shorthand for "the world is your medical oyster" but I'm finding myself a tad frustrated today. The short story is that I need to get some inoculations so I can take a business trip to India in July, which is a very cool opportunity but is involving a lot of effort I hadn't originally considered. I think I've sorted most of the confusion out in what appears to be the first instance of my insurance company being more helpful than the doctor's office. Who knew? Anyway, I have two sore upper arms and a yellow card detailing my immunities to some rather icky viruses. There was also a bit of time to knit on Leo's sleeves.

I will still need some boosters and a tetanus shot, as well as a few prescriptions, but I've got the stuff that needed a lot of lead time out of the way.

Working on Leo's sweater, I've given myself little leeway to do much else. Obviously, I knit Gir but there really hasn't been much else. I occasionally pick up my spindle which has some lovely alpaca on it.

It's not that I'm not enjoying spinning it, it's just that I really want to crank through Leo's sweater and I cannot spin and knit at the same time. But, imagine if I could...oh my own vision of Valhalla.

Knitting miles of ribbing does give me ample time to consider what comes next. I'll definitely be working on the clown hat, but what should I do in India. July = monsoon season in the area. Temperatures, apparently, can average around 120 degrees though I'm told it's quite a bit cooler where we'll be. Even so, I'm thinking small, portable, and able to be worked on mindlessly. All signs point to socks. I'm not a huge sock knitter, but I am feeling that 2 socks on 2 circs will prevent second sock syndrome AND be more likely to survive a trip through security and customs without a lot of explanation. I like working on DPNs, but having a preference for metal to wood means that's probably a bad idea.

So last night I ripped out a partially knit, now abandoned project that was started with some Socks that Rock in colorway, Carbon. It needed a bath and hanging to get the kinky bits out but now looks as good as new.

I also have some solid shades of koigu around and plenty of self patterning sock yarn, all of which will only take up a small amount of space in my luggage but which should easily entertain me for my 24 hour long commutes to and from India as well as the small amount of down time I'll have during the trip.

A certain someone gave me a wonderful little book recently on spinning.

This is a book one can read in a day but I have a feeling I'll be reading it a few times more, to really absorb what's inside. There are two techniques in particular that I've been meaning to try but haven't. The first, is the spinning of the spindle up or down one's thigh. It's not a particularly hard or scary prospect, I just never bothered trying.

Well, I'm here to tell you that if you feel hampered and slowed by spindle spinning, this is the way to go. I haven't spun much because I've been frustrated that I can't get as much spin as I can draft before the spindle hits the floor. Instead, I would spin, draft, spin again to get enough twist in my yarn. That bores me. It's probably why I find plying a bit of a bore too. It's a lot of spinning the spindle, but not much else.

Launching the spindle off my thigh, though, allows me to get more spin than a flick of the wrist has ever afforded me. I have had to get my bearings, though. Too much spin and the spindle goes a bit out of control, too little and the spindle goes off balance. But, like Goldilocks, I think I've found the right method for my little 0.9 ounce Golding.

This leads me to the second technique I've wanted to try; this one for an entirely different reason. Since starting the whole spinning endeavor, I've been using a standard Andean ply which gives me a nice little two ply yarn. This has worked great and since I prefer a rather fine weight yarn and I'm not a huge fan of singles, I get most of what I need out of this method. However, I'd always wondered if I couldn't just use the same method to ply the two ply against itself. I'd been meaning to try, but never had, because I worried that with all the time spent spinning my singles and plying them, I might bungle the whole thing and be left with garbage.

Well, take a gander:

It's a four ply, approximately worsted weight yarn, spun with some of my Almost Solid samples from Spunky Eclectic. If you are wondering, that colorway is "Redwood."

The technique is outlined in the book and it gave me the confidence to proceed with gusto.

This probably won't replace my usual two ply yarn, but it's a nice change. The four plies means that small inconsistencies in spinning, don't really show and the texture is delightful.

As a side note, I've been plying my hair for years. I used to wind my hair in the same way and then throw it into a bun which produced the most gorgeous woven effect.
If you have very long hair, you might want to give it a try. Put your hair into a ponytail, separate into 4 even sections. Take two adjacent sections, twist both in one direction and around each other in the other direction. Make sure you twist them around each other much more than you twist them individually so you have an over twisted ply. Secure with a small elastic. Repeat with the other two sections making sure to match the twists so they are both going in the same direction. Secure with a small elastic. Now twist the two plies together, remove both small elastics and replace with a single elastic over all the ends. Twist into a coil around the base of the ponytail and secure with a few bobby pins. You won’t need many because all the plies hold themselves in place so the bobby pins are more to secure the shape of the bun.

Panda wants to know when this turned into a beauty advice column.

Who knew moving to Portland would garner me so many comments? It's almost frightening how many people love the city and how few bad things people have to say about the area (rain and you can't pump your own gas, I think I can live with both).
There are so many of you I need to write back to. I can't believe how many great suggestions you've sent and warm welcomes you've offered. I'm really looking forward to moving.
I don't arrive in Oregon until the end of August, and in the mean time, I hope to be able to see all my LA friends, so I can say goodbye.

But enough of that, take a look at my yummy pygora yarn.

Here it is almost completely spun up. The kit comes with half an ounce (about 14 grams) of each fiber, so that's just enough to fill up one of my smaller spindles.

I simply loved spinning this stuff. I don't know enough about the properties of various fibers to say why, I just know that whatever it is, I'm able to spin it up superfine, balanced, soft and with a bit of loft.

I've included a dime for scale. The yarn is a two ply and check this out...

Balance, baby!

This hasn't been washed yet, it's right off the spindle. I have just shy of 54 yards (49 meters) of yarn here. Since pygora is aplenty in Portland, I plan to get more soon.

I've now started spinning some of the Yak fiber and it's not going quite as well. It's more poofy and fluffy and I don't quite have the best technique for managing that sort of fiber. It's gotten better as I've worked with it, but compared to the pygora, it's pretty crude looking.

In a little while, I'm off to Blogher, then a visit with a friend in San Francisco, then back home to help Leo pack up the truck. It's quite a weekend, indeed.

I'm home in Portland with both a feeling of elation to be back with my sweet Leo and Little Miss Panda, but also a sadness that the trek is over and Julia has gone back home. I have so much to tell you about, but I’ll try to keep from making this post too long. It was an amazing trip; one I'll look back on as being among the most memorable, but I'm exhausted. Like all of the past few weeks, we've packed as much into as little time as our little psyches could handle and it'll be days before the effects wear off.

The trip started with an easy jaunt to Santa Barbara from Los Angeles. We stayed at a place owned by a friend of Julia's. This allowed us the opportunity to stop by Village Spinning and Weaving in Solvang, CA.

While there, we availed ourselves our their various wheels, including Ashfords, Majacrafts, Louets and a Windwheel. When I left the shop, I thought I was happy with the Ashford Kiwi. That's definitely not what I expected, but it was a lovely little thing, easy to use, and it felt fine.

As we embarked on the next leg of our trip, we decided that we'd see if we could try a Schacht Matchless at Carolina Homespun in San Francisco. We figured that with the $600 price difference, the Matchless would have to be pretty darn wonderful to sway us.

I. Love. This. Wheel.

DAMMIT!

After spending hours at Carolina Homespun, spinning until we had to concede to the road trip agenda (and our rapidly waning blood sugar), we made our way to lunch and then back on the road. It was noon, and we were going to drive to the Sequoia National Forest, a mere 38 miles from San Francisco.

Five hours later, several wrong turns, some swearing at the atlas and not a Sequoia in sight, we were in stop and go traffic on the Golden Gate Bridge. In case the impact of that isn't entirely clear, that's a 5 hour detour to get us back to where we started, without actually seeing what we had hoped to see.

The sun was setting and the question became: Do we drive as far as we can at night, missing a good deal of the redwoods but still trying to get to Crater Lake the next day? Or do we drive a more reasonable distance, enjoy all the of the redwoods and skip Crater Lake?

We decided to drive as far as we could without overshooting the redwoods. There is no anxiety quite like that feeling that you've made a horribly bad decision. As we wound through the dark roads at night, hour upon hour passing, we calculated our optimal stopping point. Finally, having passed up most obvious points of civilization, we found ourselves in a quaint little area...where every light in town was turned off. The towns were silent and the motels could have as easily been abandoned, for all the life we could detect. Beam me up Scottie! I see no life here.

As the crew (all two of us) grew ever more punchy and concerned, we wound down one sleepy town's main street after another, until we found our oasis. Motel Ravenwood was open. As unlikely as it was, the owner just happened to be awake, awaiting another guest and he just happened to have an open room. We could have cried with happiness. Instead, we snatched the keys, paid our rate and made a bee line for the warmth of our beds.

The next day we awoke refreshed and ready to complete the last day of our journey. The redwoods are everything we hoped they'd be. Following the 101 up the coast, we stopped for a walk on the brisk sandy beach.

Doesn't Julia's sweatshirt look like it belongs on this beach?

My little spindle even joined us on the walk.

As we left the redwoods and headed to Crater Lake, I had a little twinge of excitement when I realized I had finally hit my new home state. If you are wondering, it's beautiful and Crater Lake is no exception.

We stopped at each little vista point and the little spindle joined in the oohing and ahhing. The atmospheric haze made the lake look dreamy and almost unreal. The spindle particularly enjoyed seeing the chipmunks. None of them broke into song.

Even the firemen were a delight to look at.

All said, it was an amazing trip. I’m still recovering, but I’m so glad I had the chance to do it. Portland is wonderful, and being back with my sweeties, is as grand as I hoped.

I should have more pictures up soon, and I feel pretty sure that Julia will have some stories to regale you with as well.

While I wait for my spinning wheel, I have been passing the time on my non-public knitting projects and my spindle spinning. I'm pleased to say that my tencel/merino blend yarn turned out every bit as lovely as I hoped.

Here it is looking rather unassuming on top of my laundry hamper.

It's about a sport weight, two ply, spun on my 0.9 ounce Golding Tsunami

It's fairly balanced, with only a single twist in it after removing it from my niddy noddy.
But check out how much better she looks basking in a little ray of sunshine.

I actually had the skein on my desk and I had already downloaded a bunch of pictures I had taken earlier. I saw the way the sun glinted off the yarn and just had to take this second picture.

And because she makes my heart melt, here's a little picture of Panda napping near me while I work.

It doesn't get much cuter than that.

So after my internet session expired in Frankfurt, I decided I needed to up the dork factor while I passed the time.

Let's be honest, it's pretty darn dorky to be blogging, taking pictures of yourself blogging and listening to .wav files of your boyfriend and doggy back home.

But why not crank out the ol' ipod and listen to science podcasts while spinning on a drop spindle? Short of bringing along a TRS-80 and a butter churn, there are few things I could have done that would have been less cool.

Sorry guys, hands off, this girl is taken! When it started to get too crowded to comfortably spin, I reverted to knitting and listening to the Unger Report.

Finally, 1:45 rolled around and I boarded my flight to Mumbai. Since I was already 17 hours into my 22 hour travel itinerary, I wasn't expecting much of note for the last 5 hours. The plane was definitely rockin' the ol' school business class, but it was roomy and they kept us well fed, so who am I to complain, but I did find one things particularly blog worthy.

Do you see that woman's tray? Note that we are in business class, which means that anytime other than those when the plane is actively taking off or landing there are folks pushing free booze your way. And if, perchance, you happen to feel a thirst coming on during the 5 minutes that the beverage cart isn't at your side, any of the flight staff will gladly hand deliver the liquor of your choice. However, this woman must have feared they'd run out before they reached her again. She has not one, but TWO glasses of white wine and a glass of cognac on her tray. I'm not sure what the glass of water is doing there. Maybe she thought it was vodka.

I passed out for a fitful 3 hours of sleep after the meal and woke up in time for the next meal and a little tea. Now I'm in my temporary hotel room for a couple hours before heading back to the Mumbai airport to fly to my final destination.

The room is nice, though for 5 hours, probably more room than I need. Heck, I never thought I'd feel this way, but if the Mumbai airport had those chest of drawer style sleeping quarters that they have in Japan, I'd have been perfectly content with that. But hey, I’ll enjoy it while I’m here. Wanna see a shot of the pool from my room?

Don't you think that would make a banging night club? Did I just say "banging night club"?

Man, I need some sleep. I'm almost out of internet time, so I'll sign off for now. Presuming my hotel near the office has internet connection, I'll be posting more soon.

I miss El Matchador but I'm rekindling my love for my beautiful little spindles while I'm here in India.

I've noticed that there is a wave of knitters taking up spinning lately and so I have a couple of simple tutorials I plan to post while I'm here, to help the newbie. I'm sure these are "well duh!" items for most people but they have been useful for me so perhaps they will be useful to others.

Today's tutorial will be on pre-drafting fibers that are being a bit stubborn. If you don't know how to pre-draft yet, there are a couple videos here. The process involves separating your roving into strips then gently tugging the fibers, lengthwise, to loosen them up.

I'm spinning some pygora right now, on my 0.9 ounce Golding spindle. The pygora is prepared as a pencil roving, meaning you do not need to separate the roving into separate strips as it's already thin enough.

Pygora spins up beautifully when properly pre-drafted

However, this particular batch has some areas that are a wee bit hard to pre-draft. I think areas have matted ever so slightly in transport, making them impossible to pre-draft the normal way. The solution is as follows.

Break off a length of roving to your liking. I prefer a couple feet of roving, many other people prefer a shorter, more manageable length. Do what you like best.

Attempt to pre-draft as you normally would.

Excuse the awkward photo, I only have 2 hands and no tripod. Imagine I was trying to do that with both hands.

To loosen the fibers, begin stretching the roving side to sides. Gently part the fibers, starting at one end and working up the length of the roving.

When you hit the matted area, spend extra time carefully releasing the fibers. Remember, you don't want to break any of the fibers, just loosen them up.

When you have worked the entire length of the roving, you have something that looks a little like this.

I then like to tug the roving, very gently, lengthwise. This not only makes it a little easier to handle, but it allows you to pre-draft it a little more.

Again, this should really show me doing this with two hands.

When you are all done, you can wind it around your distaff (if you have one) or, as I prefer to do, make a little bracelet out of the fiber, by winding it around your hand.

The finished roving looks like this:

Now just spin spin spin.

Next tutorial will be on achieving a balanced two ply on your spindle.

I've been spinning a little bit here in India and it got me thinking about creating a balanced ply. I've had pretty good success doing this on a spindle and I thought I'd share the method I like to use.

I like to think that my spindle has seen more sights than most.

Once you've spun your singles, you are ready to ply. I like to use the andean plying method but this works just as well from two center pull balls or from two ends of the same center pull ball.

Begin to ply your singles until you are ready to wind them onto the spindle.

Here's a two ply, but how do I know if it's balanced?

Holding both ends of the plied section in place, bring your two hands together and watch the way the yarn reacts. Pay close attention, you need to note which way the yarn twists, if it twist at all.

The yarn may twist around itself clockwise

Or it may twist counter-clockwise

If the yarn twists back on itself, you will need to drop your spindle and twist it in the SAME DIRECTION as the yarn twisted around itself.

This is the key. Note how many times it twisted back on itself and use that as a gauge for how much you will need to correct it. After attempting to correct the twist, do the same test again. Your goal is to have the yarn hang straight down, no matter how close you bring your hands together. The results should look like this.

It may take a little while, but with patience you will achieve this result.

After a couple of sections, you will begin to get a feel for just how long you need to let the spindle spin to get a balanced yarn. At that point, you will not need to check each section before winding on to the spindle. Instead, you can do spot checks occasionally as you ply the remaining yarn.

That little extra effort yields beautifully balanced yarn.

66 yards of perfectly plied A Type Pygora lace weight yarn.

While in India, I spun the aptly named Indian Wedding fiber I got from Janel.

The first time I spun this fiber, I think I was using a death grip of some sort because I recall having trouble drafting the fibers. This time, no such issues. It was pure delight to spin. I think the colorway is now discontinued not currently in stock but available by request. I'll have to think of something small and special to knit with what I have. As you can see, this is a fiber that loves the camera.

Here it is all plied up, using the always reliable Andean Plying method, to produce a soft 2-ply yarn. The results are about a DK weight or a touch lighter.

Here it is. in skein form, lounging about.

And what's that I see?

Ahhh, soft enough for a baby girl.

The folks over at Golding just rock. At the Fiber Frolic, owner, Diane, offered to take my 0.6 ounce and 0.9 ounce, align the hooks and mail them back to me, complete with instructions for aligning, should I ever with to try myself.
A couple days after the frolic, she wrote me to say that they have updated the design of the smaller spindle, to have a thinner shaft, and would I like them to install that shaft on my 0.6 ounce. Well, that sounded just dandy to me.

A couple days later, my beautiful spindles were back in my hands, all buffed up and looking good or maybe better than new.

Pre-surgery, the old shaft, on my smaller spindle, was about the same size as the larger spindle. You can really see the difference now. It spins amazingly well.

While I was awaiting the return of my spindles, I was putting my new spindle to good use spinning up some beautiful fiber from Nistock Farms. The colorway is called "September Glow" and it's a cotwold and silk blend.

The color of the fiber goes from a soft cream-of-mahogany color to vivid oranges and pinks. It's like a more neutral version of the Autumn Spice colorway I spun last year. The silk shows up as lovely white flecks. They tend to form little nubs, but I like them. The batts are as light as air so it spins like a dream. I may even bring El Matchador out of hiding.

Speaking of Thea, hasn't she gotten big? Her spots are becoming more and more pronounce too. She's really starting to show her cattle dog side.

The two girls have also gotten really close. They play like puppies, and snuggle up with Leo, any chance they get.

Admit it, you want in on that pile of cute.

You know that edition of Spin-Off that has my shawl in it? Well, it's evil, EVILLLL!

Why, you ask? Because it has a writeup about Cormo fiber that will make you drop everything, sell your possessions and buy gobs of it. I'm not necessarily saying this is a bad thing. If you get properly prepared fiber, you'll probably be over the moon with your purchase, but still, evil.

It doesn't help that Aoife left me a comment saying how she had picked up some Cormo herself and was really enjoying it.

So with a nearly nonexistent degree of arm twisting I ordered myself a pound of creamy white roving.

The fiber has a bit of VM in it...maybe a bit more than I'd normally like, but based on what I've read, the more gently the fiber is treated at the prep stage, the better, since aggressive carding lead to a snaggly mess.

With just a quick fluffing of the roving, I was able to produce a pretty decent singles using an unsupported long draw method on El Matchador.

After spinning the singles, I chain plied them into a soft 3-ply yarn. It's a little thick and thin but I would say it averages about 15 WPI overall.

The yarn was so amazing to spin that it was hard to stop. Even more fantastic is the sproing of the finished product. When you put your hands in the skein and stretch it out, it's got an amazing elasticity to it.

I was having so much fun with this fiber that I decide to take it for a ride on a spindle. My go-to spindle is my 0.9 ounce Golding Tsunami (though, jeeze louise, there are some seriously gorgeous new designs that are making my wallet itch. Must. Resist.) Spinning this fiber on a spindle makes me feel like I'm the greatest spinner ever... BOW TO MY AMAZING POWERS OF YARN PRODUCTION FOR I AM A SPINNING GODDESS! Ahem, sorry about that. Anyway, like I was saying, this fiber seems tailor made for spindles. It has enough crimpy grabbiness, to make it really easy to control the fiber and you don't need oodles of twist to keep it all together. Except for giving me an overinflated sense of my own skill, It's a darn near perfect fiber for spindling, as far as I can tell.

After spinning super fine singles, I used the Andean bracelet method to create a 2ply yarn.

The finished yarn is about 24 WPI and I have about 46 yards total.

Both batches of finished yarn got a bit poofier after plying, washing and twacking, than the wound singles would have you believe. I would bet this yarn would have great insulating properties when knit up.

This shot is a little nod to Mary-Heather's adorable photoshoots. This sweet little tea cup was a gift from a friend whose mother collected tea cups before she passed away. I think it's a delightfully graceful way to drink tea and a cute way to show off a delicate handspun yarn.

I love watching people spin.

Now, I'm no Abby or Beth or Janel or Jenny. I'm just a novice spinner, so definitely don't take this as a technique post.

But in the interest of doing unto others and blah blah blah, here's me spinning on my 0.9 ounce Golding Spindle.

If you are so inclined and technologically capable, I'd love it if you posted a video of your own spinning style too. Just leave a comment here and let me know if you do so.

As much as I love my wheel, there's something truly satisfying about spinning yarn on a spindle, and my spindles are quite lovely, don't you think?

I wanted to play around with combining colorways and pulled out some variegated orange and pink fiber as well as some warm vivid red, both merino/silk blends. I thought the solid red would dominate. It's so intense on its own, but the finished yarn really just looks like an intensified version of the variegated fiber.

I'm thinking it'd be pretty knit up into some sort of lace. I've only used about a third of the total quantity, maybe less, so I should be able to get a decent amount of yardage out of my stash.

Stats

• WPI: 22
• Ply: 2
• Yards: 130
• Fiber: Merino/Silk
• Colorways: Red (I think from Chasing Rainbows, but I'm not sure) and Indian Wedding from Chameleon Colorworks
• Red singles spun on 0.9 ounce Golding Tsunami spindle
• Indian Wedding singles spun on 0.95 ounce Le Fleur spindle
• Plied on 1.9 ounce Golding Celtic Knot spindle.

The Tour de Fleece is over and I managed to spin every single day. No one is more shocked than I am. I admit, I may have splurged on a few hits of fiber, along the way, but the result is thousands (!!!) of yards of finished yarn. If I were to add all the individual plies, I'd have quite a few miles, but even when I count only the yardage of the finished yarns, I have something like 2 miles worth of yarn of my very own making. I'm feeling pretty good about that.

My stint in the tour is marked by some truly wonderful memories. Not only did I take my spindle to the Tigard Knitting Guild

But we also had a visit to Ladysmith Black Mambazo at the Oregon Zoo (thanks Erica!)

And we saw Neil deGrasse Tyson at the Bagdad Theater. If you are wondering, which you shouldn't be, he is awesome.

At home, the girls donned some works in progress.

After 22 days, I had all this.

On the 23rd day, I added some lace weight singles to the pile

And in an effort to pose a mile in my pup's shoes, I wrapped almost all my new skeins around my own neck (in 95 degree weather, no less) and snapped a few more shots.

Even after 23 days of spinning, I was still enjoying myself and I'm surprised to report that I don't feel burned out on spinning at all. Perhaps it's the fact that I worked with such beautiful fibers or that I produced yarns I'm excited to knit, or maybe it's just that I didn't feel pressured to produce a certain amount or a particular type of yarn. Regardless of the reasons, I feel it was a good exercise and the girls got mighty used to all the treats they'd get after the various photo shoots, so they don't seem to be complaining either.

And as a side note, you can see some beach pictures from the weekend, here.